Hot Dip Galvanized Rectangular Tube
Hot Dip Galvanized Rectangular Tube, also known as flat pipe, flat square pipe or square flat pipe, is a hollow strip of steel.
Hot Dip Galvanized Rectangular Tube, It is a hollow strip of steel, also known as flat pipe, flat square pipe or square flat pipe (as the name implies). A large number of pipeline used for conveying fluid, such as oil, natural gas, water, gas, steam, etc., in addition, in bending, torsion strength at the same time, lighter weight, so also widely used in manufacturing machinery parts and engineering structures. Also commonly used for the production of conventional weapons, gun barrels, shells and so on.
Hot Dip Galvanized Rectangular Tube, Distinguish Between
Sizheng has hot-dip galvanized rectangular tube and electric galvanized rectangular tube two categories. Hot dip galvanized square pipe wet, dry, lead - zinc, REDOX, etc. The main difference between different hot-dip galvanizing methods is how to activate the surface of steel pipe to improve galvanizing quality after acid leaching cleaning. At present, dry method and REDOX method are mainly used in production, and their characteristics are shown in the table. The surface of zinc layer is very smooth and compact, and the structure is uniform. Good mechanical properties and corrosion resistance; Zinc consumption is 60% ~ 75% lower than hot dip galvanizing. Electrogalvanizing has certain complexity in technology, but it is necessary to use this method for single-sided coating, double-sided coating with different thickness of inner and outer surface coating, and galvanized thin-walled pipe.
Introduce the galvanized
Galvanized its protective effect is stronger, strong corrosion resistance. The entire structure is made of zinc, forming dense tetrad crystals that form a barrier on the steel plate, thus effectively preventing corrosion agents from penetrating. Corrosion resistance from zinc barrier layer protection. When zinc sacrificial protection on cut edges, scratches and coating abrades, zinc forms an insoluble oxide layer and acts as a barrier protection.
Hot Dip Galvanized Rectangular Tube Production Process
Hot Dip Galvanized Rectangular Tube Many people are more understanding, but not all people know the production process of galvanized rectangular tube, now the company will show you the production process of galvanized rectangular tube is what
Hot Dip Galvanized Rectangular Tube Production process: due to the lack of heating in the production process, there is no pitting and oxide sheet defects that often occur in hot rolled rectangular tube, with good surface quality and high finish. And the size precision of cold rolled products is high and the size precision of cold rolled products is high, the product performance and organization can meet some special use requirements, and the organization can meet some special use requirements, such as electromagnetic performance, deep drawing performance and so on. Electromagnetic performance, deep drawing performance, etc. Tool steel has good wear resistance, that is, the ability to resist wear. Good abrasion resistance, i.e. the ability to resist wear and tear. Tools can retain their shape and size under conditions of considerable pressure and friction and still maintain their shape and size. Galvanized square tube is divided into hot-dip galvanized and electric galvanized. Hot-dip galvanized square tube has thick galvanized layer, uniform coating, strong adhesion, long service life and other advantages. The cost of electrogalvanizing is low, the surface is not very smooth, and its corrosion resistance is much different than that of hot-dip galvanizing square tube.
Hot Dip Galvanized Rectangular Tube Said Method
Example: rectangular tube 40*60*5*6m, expressed as: 40 (height)* 60(width)*5 (wall thickness)* 6m (number of meters). Because the moment tube commonly used meters of 6 meters; The general industry is simply expressed as: 40*60*5
Hot Dip Galvanized Rectangular Tube Acceptance Criteria
Hot Dip Galvanized Rectangular Tube Generally, the appearance of the product is judged to be qualified. If there is leakage plating, pitting, white spots, heavy skin, bubbles, green and high frequency on the surface of the outer wall of the square tube, it is judged as unqualified product. But in the product standard deviation of the product has a specified range, that is, the size of the "allowable deviation.
Hot Dip Galvanized Rectangular Tube Theoretical Weight Scale
(Side height + side width) *2/3.14- Wall thickness}* Wall thickness *0.02466
(Side height + side width) *2*0.00785* thickness
Specification
| Product Name | Hot Dip Galvanized Rectangular Tube |
| (O.D) Outer Diameter | 10MM*10MM-500MM*500MM |
| (W.T)Wall thickness | 0.6MM-20MM |
| Length | 1M, 4M, 6M, 8M, 12M (accroding to the buyer's request) |
| Ends | Plain, Beveled, Thread With Couplings Or Sockets; Plastic Caps And Steel Rings Can Be Provided If Possible |
| Standard | GB/T3091-2001 , BS 1387-1985 , DIN EN10025 , EN10219 , JIS G3444:2004 , ASTM A53 SCH40/80/STD , BS- EN10255-2004 |
| Grade | Q195/Q215/Q235/Q345/S235JR/GR.B-D/STK500 |
| Technique | Hot Rolled Or Cold Rolled ERW |
| Package | Covered With Tarpaulin, Containers Or In Bulk |
| Certification | CE, BV, SGS, ISO9001, API |
| Delivery Time | stock or Usually within 10-45 days after receipt of advance payment |
Square And Rectangular Steel Pipe Size Chart
| Square Hollow Section | Rectangular Hollow Section | Thickness(mm) |
| 20*20 25*25 30*30 | 20*40 30*40 | 1.2-3.0 |
| 40*40 50*50 | 30*50 25*50 30*60 40*60 | 1.2-4.75 |
| 60*60 | 50*70 40*80 | 1.2-5.75 |
| 70*70 80*80 75*75 90*90 100*100 | 60*80 50*80 100*40 120*80 | 1.5-5.75 |
| 120*120 140*140 150*150 | 160*80 100*150 140*80 100*180 200*100 | 2.5-10.0 |
| 160*160 180*180 200*200 | 200*150 250*150 | 3.5-12.0 |
| 250*250 300*300 400*200 350*350 350*300 | 250*200 300*200 350*200 350*250 450*250 400*300 500*200 | 4.5-15.75 |
| 400*400 280*280 450*300 450*200 | 400*350 400*250 500*250 500*300 400*600 | 5.0-20.0 |
FAQ
Q:Are you the factory?
A:Yes,our factory are located in Shandong province.
Q:How long of your delivery date?
A:General specification of product is about 14days after received advance payment. *special requirement need about 25-30days.
Q:Transportation safety and payment security.
A:We choose the safe and reliable shipping company for the customers, short shipping date and transportation safety. Our account is under the supervision of alibaba, which guarantees the timely delivery and good quality.
Q:What countries and regions did you exported?
A:We have exported to America, Canada, Brazil, Chile, Colombia and other American countries.Britain, Russia and other European countries.Ukraine, Thailand, myanmar, Vietnam, India and other Asian countries.South Africa, Cameroon, Ghana, somalia and other African countries. Our export experience is much, familiar with different market demand, can help customers avoid a lot of trouble.
Product Display
