High Quality Alloy Steel Pipe - TC2 Titanium Alloy Aheet Plate – Zheyi

Short Description:

Product Detail

Product Tags

Feedback (2)

Our target is to consolidate and improve the quality and service of existing products, meanwhile constantly develop new products to meet different customers' demands for Steel And Tube Stainless, Astm A53 Square Pipe, Galvanized Steel Square Pipe, We never stop improving our technique and quality to keep up with the development trend of this industry and meet your satisfaction well. If you are interested in our products, please contact us freely.

High Quality Alloy Steel Pipe - TC2 Titanium Alloy Aheet Plate – Zheyi Detail:

TC2 Titanium Alloy Aheet Plate，An alloy based on titanium with other elements added. There are two kinds of homogenous crystals in titanium: α titanium with dense hexagonal structure is below 882℃, and β titanium with body center cube is above 882℃.

Technical requirements:

1. The chemical composition of titanium and titanium alloy plate shall comply with the provisions of GB/T 3620.

2. In the case of reinspection, the allowable deviation of chemical composition shall comply with the provisions of GB/T 3620.

a. the allowable deviation of the thickness of the plate should comply with the provisions of Table 1.

b. the allowable deviation of plate width and length should comply with the provisions of Table 2.

c. the corners of the plate should be cut into right angles as far as possible. The deviation should not exceed the length and width of the sheet

TC2 Titanium Alloy Aheet Plate, The Production Specification

T 0.5-1.0mm × W1000mm × L 2000-3500mm

T 1.0-5.0mm × W1000-1500mm × L 2000-3500mm

T 5.0- 30mm × W1000-2500mm × L 3000-6000mm

T 30- 80mm × W1000mm × L 2000mm

TC2 Titanium Alloy Aheet Plate, Production Status

Hot working state (R) Cold working state (Y) Annealing state (M)

TC2 Titanium Alloy Aheet Plate, Reference Standard

1: GB 228 Metal tensile test method

2: GB/T 3620.1 Titanium and titanium alloy grades and chemical composition

3: GB/T3620.2 Titanium and titanium alloy processed products chemical composition and composition allowable deviation

4: GB 4698 Sea surface method for chemical analysis of titanium, titanium and ferroalloys

TC2 Titanium Alloy Aheet Plate, The Technical Requirements

1: The chemical composition of titanium and titanium alloy plate shall comply with the provisions of GB/T 3620.1. In the case of reinspection, the allowable deviation of chemical composition shall comply with the provisions of GB/T 3620.2.

2: The allowable deviation of the thickness of the plate should comply with the provisions of Table 1.

3: The allowable deviation of plate width and length should comply with the provisions of Table 2.

4: The corners of the plate should be cut into right angles as far as possible. The deviation should not exceed the length and width of the sheet

Alloying

(1) Alloying elements can be divided into three categories according to their effect on phase transition temperature:

α -stable elements, such as aluminum, carbon, oxygen and nitrogen, stabilize α phase and increase phase transition temperature. Aluminum is the main alloying element of titanium alloy, which has obvious effect on improving the strength of alloy at room temperature and high temperature, reducing the specific gravity and increasing the elastic modulus.

(2) β -stable elements can be divided into two types: isocrystalline and eutectoid. Products made of titanium alloy

The former has molybdenum, niobium, vanadium and so on; The latter has chromium, manganese, copper, iron, silicon and so on.

(3) The elements that have little effect on phase transition temperature are neutral elements, such as zirconium and tin.

Oxygen, nitrogen, carbon and hydrogen are the main impurities in titanium alloys. The solubility of oxygen and nitrogen in the α phase is greater, which has a significant strengthening effect on the titanium alloy, but decreases the plasticity. The content of oxygen and nitrogen in titanium is usually below 0.15 ~ 0.2% and 0.04 ~ 0.05%, respectively. Hydrogen has very little solubility in the α phase, and too much hydrogen dissolved in titanium alloys produces hydrides, which make the alloy brittle. Hydrogen content in titanium alloy is usually controlled below 0.015%. The dissolution of hydrogen in titanium is reversible and can be removed by vacuum annealing.

Chemical Composition

Grade	N	C	H	Fe	O	Al	V	Pa	Mo	Ni	Ti
Gr1	0.03	0.08	0.015	0.2	0.18	/	/	/	/	/	Bal
Gr2	0.03	0.08	0.015	0.3	0.25	/	/	/	/	/	Bal
Gr3	0.05	0.08	0.015	0.3	0.35	/	/	/	/	/	Bal
Gr4	0.05	0.08	0.015	0.5	0.4	/	/	/	/	/	Bal
Gr5	0.05	0.08	0.015	0.4	0.2	5.5-6.75	3.5-4.5	/	/	/	Bal
Gr7	0.03	0.08	0.015	0.3	0.25	/	/	0.12-0.25	/	/	Bal
Gr9	0.03	0.08	0.015	0.25	0.15	2.5-3.5	2.0-3.0	/	/	/	Bal
Gr12	0.03	0.08	0.015	0.3	0.25	/	/	/	0.2-0.4	0.6-0.9	Bal

Tensile Strength

Grade	Elongation(%)	Tensile Strength (Min)		Yield Strength (Min)
Grade	Elongation(%)	ksi	Mpa	ksi	Mpa
Gr1	24	35	240	20	138
Gr2	20	50	345	40	275
Gr3	18	65	450	55	380
Gr4	15	80	550	70	483
Gr5	10	130	895	120	828
Gr7	20	50	345	40	275
Gr9	15	90	620	70	438
Gr12	18	70	438	50	345

Titanium And Alloy Products

Product name	Specifications
Titanium Rod & Bar & Ingots	Ф3mm~Ф1020mm,the maximum weight is up to 12t
Titanium Slab	(80~400)mm×(~1500)mm×(~2600)mm
Titanium Forgings	Weight per piece≤2000kg
Titanium Hot-rolled plates	(4~100)mm×(800~2600)mm×(2000~12000)mm
Titanium Cold-rolled Sheet	(0.01~4.0)mm×(800~1560)mm×( ~6000) mm
Titanium Foil / Strips	(0.01~2.0)mm×(800~1560)mm×L
Titanium Tubes / Pipes	Ф(3~114)mm×( 0.2~5)mm × (~15000)mm
Standards	GB,GJB,ASTM,AMS,BS,DIN,DMS,JIS,ГОСт
Titanium Grade	GR1,GR2,GR3,GR5,GR7,GR12 BT1-00,BT1-0,BT1-2 TA0,TA2,TA3,TA5,TA6,TA7,TA9,TA10,TB2,TC1,TC2,TC3,TC4