Factory Outlets Erw Steel Pipes And Tubes - Outside PE composite coated plastic pipe – Zheyi
Factory Outlets Erw Steel Pipes And Tubes - Outside PE composite coated plastic pipe – Zheyi Detail:
Outside PE composite coated plastic pipe, Coated (rolled) plastic composite steel pipe without diameter restrictions, the thickness of the lining layer can also be arbitrarily selected, according to the corrosion medium conditions, choose different lining thickness, length can also reach 6-12 meters; The same nominal diameter, coated (rolled) plastic composite steel pipe lining is generally between 0.5-1mm, smooth tube surface, not only the friction coefficient is small, and the friction coefficient is also small, the fluid loss in the tube is small, the transmission flow is large, to achieve energy saving. In recent years, the anti-corrosion spiral steel pipes are widely used in building water supply and drainage, drinking water distribution pipelines engineering, fire control, for the most fire pipeline steel pipe before use hot dip galvanized steel pipe, many community, hotels, office buildings are now using epoxy powder anticorrosive steel pipe with both sides plastic coated is applied to both inside and outside as fire pipe material, its appearance beautiful and durable, It has become a major product of emerging industries in the 21st century. PE inside EP coated plastic steel tube professional sales of powder coated plastic steel tube added flame retardant and modified epoxy resin powder, the temperature resistance of the coating is superior, in long-term use does not burn, do not soften.
Outside Pe Composite Coated Plastic Pipe, Advantages
The paint film of epoxy powder anticorrosive steel tube is tough, water resistant and non-toxic. Strong adhesion, good adhesion between paint film and paint film. Excellent anti-rust and water resistance, the use of excellent anti-rust raw materials, to ensure its anti-rust performance. It has good mechanical strength, tough film, abrasion resistance and impact resistance. High solid content, thick film. The molecular structure of epoxy powder anticorrosive steel pipe is characterized by the active epoxy groups in the molecular chain, which can be located at the end, middle or ring structure of the molecular chain.
Because of the active epoxy groups in the molecular structure, they can crosslink with various types of curing agent to form insoluble and infusible polymers with three-way network structure. Thermosetting powder coatings are mainly used in various countries: epoxy powder coatings, epoxy phenolic powder coatings, polyester powder coatings, epoxy-polyester powder coatings. Among them, epoxy powder coating is the early variety of application, is also the current production of plastic powder coating, widely used in electrostatic spraying process, in decorative coating plays a very important position; Because of its high chemical corrosion resistance, epoxy phenolic powder coating is mostly used for anti-corrosion coating.
Thermoplastic Powder Coatings Are Mainly
Polyethylene powder coating, POLYvinyl chloride powder coating, polypropylene powder coating, chlorinated polyether powder coating, nylon powder coating, polyphenylene sulfide powder coating, etc., these thermoplastic powder coatings have advantages and disadvantages. Thermosetting plastics have better curing levelling and wettability because of their small molecular weight, which makes them strong adhesion to the tube body when coating steel tube, and can make coated steel tube get a smooth plastic film surface. Commonly used thermosetting plastics are: epoxy resin, phenolic resin, amino resin and so on. The thickness of the coating wall is between 100 microns and 500 microns, usually 350 microns.
Outside PE composite coated plastic pipe, 1. Health, non-toxic, no scaling, no breeding of microorganisms, ensure the quality of fluid 2. 3. The installation process is mature, convenient and fast, and the connection with ordinary galvanized pipe is the same. 4. Good weather resistance. 5. Smooth pipe wall, improve conveying efficiency, long service life.
Outside PE composite coated plastic pipe, Connection mode: thread connection: use manual die twisted wire or electric wire sleeve machine to process pipe thread, pay attention to cooling during processing; Flange connection, on-site measurement, drawing pipeline single line processing map, processing coating, plastic lining, and then transported to the site installation; Non-coated, lined plastic steel pipe and pipe fittings can be used in the field, flange welding, assembling pipeline, and then disassembled for coating, lined plastic processing, and then transported to the site installation; Finished grooved coated plastic pipe fittings should be preferred; Grooves shall be pressed by groove rolling machine, and the grooves shall be in accordance with the relevant standards.
Constituent Of The Material
| Grade | C | Mn | Si | S | P | UTS(MPa) | YS(MPa) | EI(%) |
| Q235B | 0.12-0.20 | 0.30-0.70 | 0.30 | 0.045 | 0.045 | 375-500 | 235 | 26 |
| Q345B | 0.12-0.20 | 1.20-1.60 | 0.20-0.55 | ≤0.045 | ≤0.045 | 510-600 | 345 | 22 |
| 20#(GB) | 0.17-0.23 | 0.38-0.65 | 0.17-0.37 | ≤0.030 | ≤0.030 | 410-550 | ≥245 | ≥20 |
| HDPE PIPE SIZES CHART | |||||||||
| Dia | Deviation | 0.4Mpa | 0.5Mpa | 0.6Mpa | 0.8Mpa | 1.0Mpa | 1.25Mpa | 1.6MPa | 2.0Mpa |
| Thickness | Thickness | Thickness | Thickness | Thickness | Thickness | Thickness | Thickness | ||
| mm | mm | mm | mm | mm | mm | mm | mm | mm | mm |
| 16 | 0.3 | 2.3 | |||||||
| 20 | 0.3 | 2.3 | 2.3 | ||||||
| 25 | 0.3 | 2.3 | 2.3 | 3 | |||||
| 32 | 0.3 | 2.3 | 2.4 | 3 | 3.6 | ||||
| 40 | 0.4 | 2.3 | 2.4 | 3 | 3.7 | 4.5 | |||
| 50 | 0.4 | 2.3 | 2.4 | 3 | 3.7 | 4.6 | 5.6 | ||
| 63 | 0.4 | 2.5 | 3 | 3.8 | 4.7 | 5.8 | 7.1 | ||
| 75 | 0.5 | 2.9 | 3.6 | 4.5 | 5.6 | 6.8 | 8.4 | ||
| 90 | 0.6 | 3.5 | 4.3 | 5.4 | 6.7 | 8.2 | 10.1 | ||
| 110 | 0.7 | 4.2 | 5.3 | 6.6 | 8.1 | 10 | 12.3 | ||
| 125 | 0.8 | 4.8 | 6 | 7.4 | 9.2 | 11.4 | 14 | ||
| 140 | 0.9 | 5.4 | 6.7 | 8.3 | 10.3 | 12.7 | 15.7 | ||
| 160 | 1 | 6.2 | 7.7 | 9.5 | 11.8 | 14.6 | 17.9 | ||
| 180 | 1.1 | 6.9 | 8.6 | 10.7 | 13.3 | 16.4 | 20.1 | ||
| 200 | 1.2 | 7.7 | 9.6 | 11.9 | 14.7 | 18.2 | 22.4 | ||
| 225 | 1.4 | 8.6 | 10.8 | 13.4 | 16.6 | 16.6 | 25.2 | ||
| 250 | 1.5 | 9.6 | 11.9 | 14.8 | 18.4 | 22.7 | 27.9 | ||
| 280 | 1.7 | 10.7 | 13.4 | 16.6 | 20.6 | 25.4 | 31.3 | ||
| 315 | 1.9 | 7.7 | 9.7 | 12.1 | 15 | 18.7 | 23.2 | 28.6 | 35.2 |
| 355 | 2.2 | 8.7 | 10.9 | 13.6 | 16.9 | 21.1 | 26.1 | 32.2 | 39.7 |
| 400 | 2.4 | 9.8 | 12.3 | 15.3 | 19.1 | 23.7 | 29.4 | 36.3 | 44.7 |
| 450 | 2.7 | 11 | 13.8 | 17.2 | 21.5 | 26.7 | 33.1 | 40.9 | 50.3 |
| 500 | 3 | 12.3 | 15.3 | 19.1 | 23.9 | 29.7 | 36.8 | 45.4 | 55.8 |
| 560 | 3.4 | 13.7 | 17.2 | 21.4 | 26.7 | 33.2 | 41.2 | 50.8 | 62.5 |
| 630 | 3.8 | 15.4 | 19.3 | 24.1 | 30 | 37.4 | 46.3 | 57.2 | 70.3 |
| 710 | 6.4 | 17.4 | 21.8 | 27.2 | 33.9 | 42.1 | 52.2 | 64.5 | 79.3 |
| 800 | 7.2 | 19.6 | 24.5 | 30.6 | 38.1 | 47.4 | 58.8 | 72.6 | 89.3 |
| 900 | 8.1 | 22 | 27.6 | 34.4 | 42.9 | 53.3 | 66.2 | 81.7 | |
| 1000 | 9 | 24.5 | 30.6 | 38.2 | 47.7 | 59.3 | 72.5 | 90.2 | |
Product Display
Product detail pictures:
Related Product Guide:
Now we have superior devices. Our solutions are exported to your USA, the UK and so on, enjoying a superb name between customers for Factory Outlets Erw Steel Pipes And Tubes - Outside PE composite coated plastic pipe – Zheyi , The product will supply to all over the world, such as: India, Iran, Portland, We have a good reputation for stable quality products, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with car manufacturers, auto part buyers and the majority of colleagues both at home and abroad. We expect sincere cooperation and common development!
By Gladys from Cannes - 2017.12.31 14:53
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Pearl Permewan from kazakhstan - 2018.10.31 10:02
