Mobile Phone
+86 15954170522
E-mail
ywb@zysst.com

China wholesale Alloy 20 Pipe – TC2 Titanium Alloy Aheet Plate – Zheyi

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We offer wonderful energy in high-quality and improvement,merchandising,product sales and marketing and advertising and procedure for Black Steel Square Tube, Structural Steel Pipe, Steel And Tube Stainless, We're searching ahead to setting up long-term company associations with you. Your comments and solutions are remarkably appreciated.
China wholesale Alloy 20 Pipe – TC2 Titanium Alloy Aheet Plate – Zheyi Detail:

TC2 Titanium Alloy Aheet Plate,An alloy based on titanium with other elements added. There are two kinds of homogenous crystals in titanium: α titanium with dense hexagonal structure is below 882℃, and β titanium with body center cube is above 882℃.

Technical requirements:

1. The chemical composition of titanium and titanium alloy plate shall comply with the provisions of GB/T 3620.

2. In the case of reinspection, the allowable deviation of chemical composition shall comply with the provisions of GB/T 3620.

a. the allowable deviation of the thickness of the plate should comply with the provisions of Table 1.

b. the allowable deviation of plate width and length should comply with the provisions of Table 2.

c. the corners of the plate should be cut into right angles as far as possible. The deviation should not exceed the length and width of the sheet

TC2 Titanium Alloy Aheet Plate, The Production Specification

T 0.5-1.0mm × W1000mm × L 2000-3500mm

T 1.0-5.0mm × W1000-1500mm × L 2000-3500mm

T 5.0- 30mm × W1000-2500mm × L 3000-6000mm

T 30- 80mm × W1000mm × L 2000mm

TC2 Titanium Alloy Aheet Plate, Production Status

Hot working state (R) Cold working state (Y) Annealing state (M)

TC2 Titanium Alloy Aheet Plate, Reference Standard

1: GB 228 Metal tensile test method

2: GB/T 3620.1 Titanium and titanium alloy grades and chemical composition

3: GB/T3620.2 Titanium and titanium alloy processed products chemical composition and composition allowable deviation

4: GB 4698 Sea surface method for chemical analysis of titanium, titanium and ferroalloys

TC2 Titanium Alloy Aheet Plate, The Technical Requirements

1: The chemical composition of titanium and titanium alloy plate shall comply with the provisions of GB/T 3620.1. In the case of reinspection, the allowable deviation of chemical composition shall comply with the provisions of GB/T 3620.2.

2: The allowable deviation of the thickness of the plate should comply with the provisions of Table 1.

3: The allowable deviation of plate width and length should comply with the provisions of Table 2.

4: The corners of the plate should be cut into right angles as far as possible. The deviation should not exceed the length and width of the sheet

Alloying

TC2 Titanium Alloy Aheet Plate,An alloy based on titanium with other elements added. There are two kinds of homogenous crystals in titanium: α titanium with dense hexagonal structure is below 882℃, and β titanium with body center cube is above 882℃.

(1) Alloying elements can be divided into three categories according to their effect on phase transition temperature:

α -stable elements, such as aluminum, carbon, oxygen and nitrogen, stabilize α phase and increase phase transition temperature. Aluminum is the main alloying element of titanium alloy, which has obvious effect on improving the strength of alloy at room temperature and high temperature, reducing the specific gravity and increasing the elastic modulus.

(2) β -stable elements can be divided into two types: isocrystalline and eutectoid. Products made of titanium alloy

The former has molybdenum, niobium, vanadium and so on; The latter has chromium, manganese, copper, iron, silicon and so on.

(3) The elements that have little effect on phase transition temperature are neutral elements, such as zirconium and tin.

Oxygen, nitrogen, carbon and hydrogen are the main impurities in titanium alloys. The solubility of oxygen and nitrogen in the α phase is greater, which has a significant strengthening effect on the titanium alloy, but decreases the plasticity. The content of oxygen and nitrogen in titanium is usually below 0.15 ~ 0.2% and 0.04 ~ 0.05%, respectively. Hydrogen has very little solubility in the α phase, and too much hydrogen dissolved in titanium alloys produces hydrides, which make the alloy brittle. Hydrogen content in titanium alloy is usually controlled below 0.015%. The dissolution of hydrogen in titanium is reversible and can be removed by vacuum annealing.

Chemical Composition 

Grade N C H Fe O Al V Pa Mo Ni Ti
Gr1 0.03 0.08 0.015 0.2 0.18 / / / / / Bal
Gr2 0.03 0.08 0.015 0.3 0.25 / / / / / Bal
Gr3 0.05 0.08 0.015 0.3 0.35 / / / / / Bal
Gr4 0.05 0.08 0.015 0.5 0.4 / / / / / Bal
Gr5 0.05 0.08 0.015 0.4 0.2 5.5-6.75 3.5-4.5 / / / Bal
Gr7 0.03 0.08 0.015 0.3 0.25 / / 0.12-0.25 / / Bal
Gr9 0.03 0.08 0.015 0.25 0.15 2.5-3.5 2.0-3.0 / / / Bal
Gr12 0.03 0.08 0.015 0.3 0.25 / / / 0.2-0.4 0.6-0.9 Bal

Tensile Strength

Grade Elongation(%) Tensile Strength (Min) Yield Strength (Min)
ksi Mpa ksi Mpa
Gr1 24 35 240 20 138
Gr2 20 50 345 40 275
Gr3 18 65 450 55 380
Gr4 15 80 550 70 483
Gr5 10 130 895 120 828
Gr7 20 50 345 40 275
Gr9 15 90 620 70 438
Gr12 18 70 438 50 345

Titanium And Alloy Products

Product name Specifications
Titanium Rod & Bar & Ingots Ф3mm~Ф1020mm,the maximum weight is up to 12t
Titanium Slab (80~400)mm×(~1500)mm×(~2600)mm
Titanium Forgings Weight per piece≤2000kg
Titanium Hot-rolled plates (4~100)mm×(800~2600)mm×(2000~12000)mm
Titanium Cold-rolled Sheet (0.01~4.0)mm×(800~1560)mm×( ~6000) mm
Titanium Foil / Strips (0.01~2.0)mm×(800~1560)mm×L
Titanium Tubes / Pipes Ф(3~114)mm×( 0.2~5)mm × (~15000)mm
Standards GB,GJB,ASTM,AMS,BS,DIN,DMS,JIS,ГОСт
Titanium Grade
  • GR1,GR2,GR3,GR5,GR7,GR12
  • BT1-00,BT1-0,BT1-2
  • TA0,TA2,TA3,TA5,TA6,TA7,TA9,TA10,TB2,TC1,TC2,TC3,TC4

Product Display

TC2-Titanium-Alloy-Aheet-Plate-(1)
TC2-Titanium-Alloy-Aheet-Plate-(3)
TC2-Titanium-Alloy-Aheet-Plate-(2)


Product detail pictures:

China wholesale Alloy 20 Pipe – TC2 Titanium Alloy Aheet Plate  – Zheyi detail pictures

China wholesale Alloy 20 Pipe – TC2 Titanium Alloy Aheet Plate  – Zheyi detail pictures

China wholesale Alloy 20 Pipe – TC2 Titanium Alloy Aheet Plate  – Zheyi detail pictures


Related Product Guide:

Together with the "Client-Oriented" enterprise philosophy, a arduous good quality control technique, sophisticated producing equipment and a sturdy R&D staff, we generally offer superior quality merchandise, superb solutions and aggressive rates for China wholesale Alloy 20 Pipe – TC2 Titanium Alloy Aheet Plate – Zheyi , The product will supply to all over the world, such as: Egypt, Algeria, Greek, Corporate goal: Customers' satisfaction is our goal, and sincerely hope to establish long-terms stable cooperative relations with customers to jointly develop the market. Building brilliant tomorrow together!Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.
  • The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
    5 Stars By Constance from Peru - 2018.06.30 17:29
    Problems can be quickly and effectively resolved, it is worth to be trust and working together.
    5 Stars By Judy from Lithuania - 2018.06.05 13:10