China wholesale Alloy 20 Pipe – TC2 Titanium Alloy Aheet Plate – Zheyi
China wholesale Alloy 20 Pipe – TC2 Titanium Alloy Aheet Plate – Zheyi Detail:
TC2 Titanium Alloy Aheet Plate,An alloy based on titanium with other elements added. There are two kinds of homogenous crystals in titanium: α titanium with dense hexagonal structure is below 882℃, and β titanium with body center cube is above 882℃.
Technical requirements:
1. The chemical composition of titanium and titanium alloy plate shall comply with the provisions of GB/T 3620.
2. In the case of reinspection, the allowable deviation of chemical composition shall comply with the provisions of GB/T 3620.
a. the allowable deviation of the thickness of the plate should comply with the provisions of Table 1.
b. the allowable deviation of plate width and length should comply with the provisions of Table 2.
c. the corners of the plate should be cut into right angles as far as possible. The deviation should not exceed the length and width of the sheet
TC2 Titanium Alloy Aheet Plate, The Production Specification
T 0.5-1.0mm × W1000mm × L 2000-3500mm
T 1.0-5.0mm × W1000-1500mm × L 2000-3500mm
T 5.0- 30mm × W1000-2500mm × L 3000-6000mm
T 30- 80mm × W1000mm × L 2000mm
TC2 Titanium Alloy Aheet Plate, Production Status
Hot working state (R) Cold working state (Y) Annealing state (M)
TC2 Titanium Alloy Aheet Plate, Reference Standard
1: GB 228 Metal tensile test method
2: GB/T 3620.1 Titanium and titanium alloy grades and chemical composition
3: GB/T3620.2 Titanium and titanium alloy processed products chemical composition and composition allowable deviation
4: GB 4698 Sea surface method for chemical analysis of titanium, titanium and ferroalloys
TC2 Titanium Alloy Aheet Plate, The Technical Requirements
1: The chemical composition of titanium and titanium alloy plate shall comply with the provisions of GB/T 3620.1. In the case of reinspection, the allowable deviation of chemical composition shall comply with the provisions of GB/T 3620.2.
2: The allowable deviation of the thickness of the plate should comply with the provisions of Table 1.
3: The allowable deviation of plate width and length should comply with the provisions of Table 2.
4: The corners of the plate should be cut into right angles as far as possible. The deviation should not exceed the length and width of the sheet
Alloying
TC2 Titanium Alloy Aheet Plate,An alloy based on titanium with other elements added. There are two kinds of homogenous crystals in titanium: α titanium with dense hexagonal structure is below 882℃, and β titanium with body center cube is above 882℃.
(1) Alloying elements can be divided into three categories according to their effect on phase transition temperature:
α -stable elements, such as aluminum, carbon, oxygen and nitrogen, stabilize α phase and increase phase transition temperature. Aluminum is the main alloying element of titanium alloy, which has obvious effect on improving the strength of alloy at room temperature and high temperature, reducing the specific gravity and increasing the elastic modulus.
(2) β -stable elements can be divided into two types: isocrystalline and eutectoid. Products made of titanium alloy
The former has molybdenum, niobium, vanadium and so on; The latter has chromium, manganese, copper, iron, silicon and so on.
(3) The elements that have little effect on phase transition temperature are neutral elements, such as zirconium and tin.
Oxygen, nitrogen, carbon and hydrogen are the main impurities in titanium alloys. The solubility of oxygen and nitrogen in the α phase is greater, which has a significant strengthening effect on the titanium alloy, but decreases the plasticity. The content of oxygen and nitrogen in titanium is usually below 0.15 ~ 0.2% and 0.04 ~ 0.05%, respectively. Hydrogen has very little solubility in the α phase, and too much hydrogen dissolved in titanium alloys produces hydrides, which make the alloy brittle. Hydrogen content in titanium alloy is usually controlled below 0.015%. The dissolution of hydrogen in titanium is reversible and can be removed by vacuum annealing.
Chemical Composition
Grade | N | C | H | Fe | O | Al | V | Pa | Mo | Ni | Ti |
Gr1 | 0.03 | 0.08 | 0.015 | 0.2 | 0.18 | / | / | / | / | / | Bal |
Gr2 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | / | / | Bal |
Gr3 | 0.05 | 0.08 | 0.015 | 0.3 | 0.35 | / | / | / | / | / | Bal |
Gr4 | 0.05 | 0.08 | 0.015 | 0.5 | 0.4 | / | / | / | / | / | Bal |
Gr5 | 0.05 | 0.08 | 0.015 | 0.4 | 0.2 | 5.5-6.75 | 3.5-4.5 | / | / | / | Bal |
Gr7 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | 0.12-0.25 | / | / | Bal |
Gr9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5-3.5 | 2.0-3.0 | / | / | / | Bal |
Gr12 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | 0.2-0.4 | 0.6-0.9 | Bal |
Tensile Strength
Grade | Elongation(%) | Tensile Strength (Min) | Yield Strength (Min) | ||
ksi | Mpa | ksi | Mpa | ||
Gr1 | 24 | 35 | 240 | 20 | 138 |
Gr2 | 20 | 50 | 345 | 40 | 275 |
Gr3 | 18 | 65 | 450 | 55 | 380 |
Gr4 | 15 | 80 | 550 | 70 | 483 |
Gr5 | 10 | 130 | 895 | 120 | 828 |
Gr7 | 20 | 50 | 345 | 40 | 275 |
Gr9 | 15 | 90 | 620 | 70 | 438 |
Gr12 | 18 | 70 | 438 | 50 | 345 |
Titanium And Alloy Products
Product name | Specifications |
Titanium Rod & Bar & Ingots | Ф3mm~Ф1020mm,the maximum weight is up to 12t |
Titanium Slab | (80~400)mm×(~1500)mm×(~2600)mm |
Titanium Forgings | Weight per piece≤2000kg |
Titanium Hot-rolled plates | (4~100)mm×(800~2600)mm×(2000~12000)mm |
Titanium Cold-rolled Sheet | (0.01~4.0)mm×(800~1560)mm×( ~6000) mm |
Titanium Foil / Strips | (0.01~2.0)mm×(800~1560)mm×L |
Titanium Tubes / Pipes | Ф(3~114)mm×( 0.2~5)mm × (~15000)mm |
Standards | GB,GJB,ASTM,AMS,BS,DIN,DMS,JIS,ГОСт |
Titanium Grade |
|
Product Display
Product detail pictures:
Related Product Guide:
With advanced technologies and facilities, strict quality control, reasonable price, superior service and close co-operation with customers, we are devoted to providing the best value for our customers for China wholesale Alloy 20 Pipe – TC2 Titanium Alloy Aheet Plate – Zheyi , The product will supply to all over the world, such as: Swiss, kazan, Swansea, Good quality and reasonable price have brought us stable customers and high reputation. Providing 'Quality Products, Excellent Service, Competitive Prices and Prompt Delivery', we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. We'll work whole-heartedly to improve our solutions and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.
By Hedy from Belarus - 2017.02.18 15:54
It's really lucky to find such a professional and responsible manufacturer, the product quality is good and delivery is timely, very nice.
By Esther from Iran - 2017.05.02 18:28